Application Of Minimum Curvature Method To Wellpath Calculations
Keywords:
Complex computations, Excel Spreadsheet program, Minimum Curvature methodAbstract
A major drawback of directional and horizontal well drilling is the numerous complex computations required to be done while planning a well. These computations are very stressful and time consuming especially when done manually. The aim of this study was to assess the application of minimum curvature method to wellpath calculations. Therefore this study developed a user friendly Excel Spreadsheet program that would make the computations of the well trajectory parameters easier, faster and accurate. An Excel Spreadsheet program was developed employing the Minimum Curvature method (and for other five methods) for wellpath design and planning. This would help increase the usage of these trajectory methods especially the Minimum Curvature method. The program was able to provide pictorial views both in the vertical and horizontal plane of the trajectory of the drilling bit's position in the wellbore. This would therefore help to minimize risk and uncertainty surrounding hitting predetermined target. This is possible because deviations can easily be detected and the necessary directional corrections or adjustment be initiated to re-orient the drilling bit to the right course before (planning process) and during the drilling operations.
References
Adams J. Neal and Charrier Tommie, Drilling Engineering, A Complete Well Planning Approach, PennWell Publishing Company, Tulsa, Oklahoma, 1985, pp. 342, 345.
Bourgoyne, Millheim, Chenvert, Young: Applied Drilling Engineering, SPE Textbook Series, Vol. 2, 1991, pp 351-366.
Chukwu A. Godwin, Drilling and Well Completion Lecture material, African University of Science and Technology, Abuja-Nigeria, 2008, pp 257.
Molvar E.M., 2003. Drilling smarter: Using minimum-footprint directional drilling to reduce oil and gas impacts in the Intermountain West. Laramie, WY: Biodiversity Conservation Alliance, 32 pp, 2003.
Osisanya O. Samuel, Advanced Drilling Engineering Lecture Material, African University of Science and Technology, Abuja-Nigeria, Spring 2009, pp 276-279,
Sawaryn S.J., SPE, and J.L. Thorogood, ''A Compendium of Directional Calculations Based on the Minimum Curvature Method'', SPE 84246-PA, 2005, 1st presented at the 2003 SPE Annual Technical Conference and Exhibition, Denver. Colorado.
Tarek Ahmed, Reservoir Engineering Handbook, Second Edition, Gulf Publishing Company, Houston, Texas, 2000, pp 515, 615.
